Yes, as long as the charms are sealed into the case rather than glued or clipped on top. At The Charmé Edit, every charm is placed by hand directly onto the case and sealed permanently into a gel layer that cures over several days, so there is nothing hanging, clasped, or stuck on with surface glue that can work loose. That construction method is the real answer to whether these cases hold up, because durability comes down to how the charms are attached, not just what they are made of. The sections below cover what that gel base is, how long it takes to cure properly, and how to look after a case so it keeps looking the way it did on day one. None of it requires special treatment, just an understanding of why the attachment method matters more than anything printed on the box.
What Is the Case Actually Made Of?
The base is a case in your chosen colour and gel finish, with charms arranged on top and sealed into that gel layer as part of production. The Charmé Edit offers finishes including White (Glitter Gel), White (White Gel), and Black (Black Gel), so the gel itself is the surface the charms sit in rather than a separate coating added afterwards. Because the charms are embedded into this layer rather than resting loose on the case, there is no clasp, loop, or ring involved anywhere in the design, which is usually where damage or loss happens on other types of phone charms. Once the gel has cured, the charms and the case surface form a single, flush layer, which is what allows the design to go through pockets, bags, and daily handling without individual pieces catching, lifting, or pulling away from the base underneath them.
How Long Does the Gel Actually Take to Cure?
Curing is not instant, and that time matters for how durable the finished case is. In The Charmé Edit's own DIY phone case kits, the instructions are specific: the gel surface dries within 24 hours, but it is fully cured after 2 to 3 days, and the case should be kept somewhere safe and dust-free while that happens. For made to order cases, where the charm placement and sealing is done for you, production takes 4 to 7 working days before the case even ships, which allows for the same curing process to complete properly before the case reaches you. A case that has been rushed through production without that curing window is far more likely to have charms that shift, lift, or feel soft to the touch, so the wait is directly tied to how long the finished design will actually last.
Does Daily Handling Damage the Charms?
Not if the charms are properly sealed, since the attachment method is what determines how a case copes with daily use, not the charms themselves. Because every charm sits embedded in the gel layer rather than glued on top or hung from a clasp, there is nothing proud of the surface to catch on fabric linings, car seats, or the inside of a bag. Pressing the case, dropping it in a pocket, or setting it face down on a table does not put direct stress on an individual charm the way a dangling charm on a loop would. The main things that genuinely affect a sealed design over time are heat and abrasive contact, which is why care guidance focuses on those two factors specifically rather than ordinary carrying and handling. Ordinary daily knocks, from being set down, carried, or bumped against other items in a bag, are exactly what the sealed gel layer is designed to withstand.
How Should You Care for a Charm Case to Keep It Durable?
Keep care simple and the case will stay durable for a long time. Wipe it with a soft, slightly damp cloth rather than submerging it in water, avoid leaving it somewhere very hot for long periods such as a car dashboard in direct sun, and skip abrasive cleaners or scrubbing on the gel surface. Because the charms are sealed rather than loose, there is nothing to unclip, tighten, or lose, which removes most of the maintenance that comes with charms attached by a clasp or ring. This is also why checking attachment method matters more than checking appearance when you are judging how durable a charm case will actually be, since a case that looks identical to another on day one can behave very differently after weeks of real use depending on how the charms were put on in the first place.
Frequently Asked Questions
Do the charms fall off a charm phone case over time?
No, not when they are sealed into the case properly. At The Charmé Edit, every charm is individually placed and sealed permanently into a gel layer that cures over several days, so there is nothing hanging or held on by a clasp or ring that can work loose with everyday use. This is different from charms sold as separate dangling accessories that clip onto a loop or strap, where the clasp itself is usually the weak point over time. Because the charm becomes flush with the case surface once the gel has cured, there is also no raised edge for a charm to catch on and get pulled away from while the case is in a pocket or bag. The attachment method is the main factor in whether charms stay put, far more than the charm design itself.
What is the gel base actually made from?
The gel base is the coloured, cured layer the case is finished in, available in finishes such as White (Glitter Gel), White (White Gel), and Black (Black Gel). Charms are arranged directly into this layer during production rather than added as a separate step on top of a finished case, which is what allows them to sit flush with the surface once curing is complete. In The Charmé Edit's DIY kits, the same gel is supplied with the kit and instructions note it surface dries within 24 hours but is fully cured after 2 to 3 days. That curing window is what gives the finished base its durability, since a gel that has not had time to set properly will not hold charms as securely as one that has been left to cure fully before use.
How long does a charm phone case take to be made?
For a made to order case, production takes 4 to 7 working days before it ships, because the gel needs that time to cure properly around each charm. This is not shipping time, it is the actual production window during which the case is assembled and the gel sets. If you are making your own case with a DIY kit, the hands-on part takes around 15 to 30 minutes to lay out and place the charms, but the gel itself still needs 24 hours to surface dry and 2 to 3 days to fully cure before the case should be used normally. In both cases, the curing time is directly linked to durability, since charms placed into gel that has not finished curing are more likely to shift or lift than charms left to set for the full window.
Can you clean a charm phone case without damaging it?
Yes, as long as you clean it gently. Wipe the case with a soft, slightly damp cloth rather than submerging it in water, and avoid abrasive cleaners or scrubbing directly on the gel surface, since that can dull or mark the finish over time. It also helps to avoid leaving the case somewhere very hot for extended periods, such as on a car dashboard in direct sunlight, since heat is one of the few things that can affect a properly sealed gel layer. Because the charms are embedded into the case rather than glued or clipped on separately, there is nothing to unclip or tighten as part of cleaning, which makes the actual process simpler than caring for charms attached by a loop or clasp. Regular gentle wiping is enough for normal daily use.
Is a DIY charm phone case kit as durable as a made to order one?
Yes, provided the gel is given the full curing time stated in the instructions. A DIY kit uses the same type of gel base as a made to order case, and the instructions are specific about timing: avoid touching the gel once it is applied, add charms within 5 minutes of spreading it since it dries quickly, and then leave the case somewhere safe and dust-free, as it surface dries within 24 hours but is not fully cured for 2 to 3 days. The durability comes from following that process correctly rather than from who assembles it. A DIY case where the charms were pressed in and the curing time was respected will hold up the same way a made to order case does, since the underlying gel and placement method are the same in both.